Batch Output Format "Post-Scanning Split"
=========================================

This batch output format performs a Vertical split of bitonal,
color, and grayscale images into 2, 3, 4, 5 or 6 images per side
of a scanned page, just like the current split functionality that
is performed on-the-fly during scanning.

Click on the "Setup" button to configure Post-Scanning Split.

Images will be split only if they fall within a specified image width.
The Image Width range (Minimum and Maximum) will be specified in 1/100
of an inch just like the Split settings in Page Setup.

Images whose width falls outside of the Image Width range will not be split.

Image splitting will be able to be configured such that either the Front
and/or Rear images of a scanned page can be specified for splitting.

If a scanned page has both a Front and Rear image (i.e., duplex scan), and
splitting is configured for both, then both the Front and Rear image must
fall within the Image Width range. If either the Front or Rear image falls
outside of the Image Width range, then neither the Front nor Rear image will
be split.

After splitting the Front/Rear into the specified # of images, the images for
each scanned page will be re-ordered (if necessary) according to a specified
image order, before being written to disk.

After specifying the number of split images per side and enabling the Front
and/or Rear images to be split, the Setup dialog will display a diagram
of split images per side with each image segment having a Red "X" on it.
To specify the image order, you must click on each image segment in the order
you want the images to be output. After clicking on an image, the Red "X"
will go away and that image segment will be added to the "Output Order" that
is displayed at the bottom of the Setup dialog.

If an image is left with a Red "X" then that split image segment will always be
deleted and therefore will not be output (e.g., last page of a pamphlet that
is always blank).

IMPORTANT: The Post-Scanning Split batch Output Format is what we call a Scan
Cache batch output format. The splitting of the images shall be done in the Scan
Cache (e.g., c:\Scan6C\...) and the images shall not be transferred to an Output
directory. As a result, Post-Scanning Split must be used in combination with other
batch output formats as part of Multiple Batch Output Formats (MBO). In this way,
any other batch output format can output the split images.

Known Limitations
-----------------
*  If dual stream scanning (i.e., scanning simultaneously in Bitonal and Color),
   you must configure the Image Order in the Dual Stream Page Setup to one of the
   following:

         - Front Color; Rear Color; Front Bitonal; Rear Bitonal
         - Front Bitonal; Rear Bitonal; Front Color; Rear Color

   Having a different image order for the scanned images will result in an 
   incorrect Output Image Order from Post-Scanning Split.





